Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER Manual de usuario descargar pdf (Pagina 54)

Section 5: Commissioning

05/11 55 51209 Revision 2

5.7.2 Configuring Digital Inputs and Outputs

Under -[Digital I/O parameter], you can open the configuration menu for outputs and inputs:

Setup/Digital I/O parameter

Output 1 marker bit 1 X64=1

Output 2 marker bit 2 X65=1

Output 3 marker bit 3 X66=1

Input 1 on -no action-

Input 1 off -no action-

Input 2 on -no action-

Input 2 off -no action-

Input 3 on -no action-

Input 3 off -no action-

5.7.3 Configuring Outputs

Configure the required function for [Output 1] to [Output 3] by selecting a signal from the list; see

Chapter 5.7.1. The output goes to the corresponding state.

Example:

Setup/Digital I/O parameter

Output 1 below zero X35=1

Output 2 above Max X33=0

Output 3 center zero X36=1

Input 1 on -no action-

[Output 1] is true (active), when the weight value drops below zero (X35=1).

[Output 2] remains (active), as long as the weight is not above Max (X33=0).

[Output 3] is true (active), when the weight is zero +/- 1/4 d (X36=1).

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 99 100

Sin comentarios

Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER Manual de usuario Pagina 54