Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER Manual de usuario descargar pdf (Pagina 52)

Section 5: Commissioning

05/11 53 51209 Revision 2

5.6.5 Network Parameters

You can configure settings for the network connections (built-in LAN adaptor) under -[Network

parameter].

Setup/Operating parameter

HW address 00:90:6C:FB:E9:85

Fixed address determined by the

instrument.

Hostname PR5220-UDOWEIGH

The device name can be defined* by the

user.

Use DHCP

The address is assigned by the server

IP Address 172.24.21.82

Address assigned by the server

Subnetmask 255.255.240.0

Mask for the permissible IP address range

Standardgateway 0.0.0.0

IP number for the gateway

Remote access

VNC-Client 255.255.255.255

Permitted client for instrument operation

*The [Hostname] is subject to the following restrictions:

Minimum number of characters: 2, maximum number of characters: 24

1. The first character must be a letter. Spaces are not permitted.

0-9, A-Z (upper and lower case letters are not distinguished) are permitted.

- or . may be included, but neither at the end nor in succession.

When setting [IP address], [Subnetmask] and [Standardgateway], please consult with your network

administrator.

You can configure access permissions for the address specified under [VNC client]:

VNC client 0.0.0.0.

Access over VNC not permitted

VNC client 172.24.21.101

Access only from client machine with this address

VNC client 172.24.21.255

Access from any client with address within range 172.24.21.1 to

254

VNC client 255.255.255.255

Access from client with any address

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 99 100

Sin comentarios

Fairbanks X SERIES PR 5220 ETHERNET TRANSMITTER Manual de usuario Pagina 52